We fit ARB and Kaymar Rear Wheel Carriers and Bars, plus Hayman Reese Towbars and X-Bar.

Rear Step Towbars and Wheel Carriers

ARB has an extensive range of Rear Step towbars and Wheel Carriers for a wide range of vehicles, providing maximum protection for rear panels, improved departure angles and integrated towing systems.

The ARB model range

  • Rear Step Towbar Summit
  • Rear Step Towbar Summit Raw
  • Rear Step Towbar
  • Rear Bar
  • Rear Bar Wheel Carrier

Rear Step Towbars

 

Summary of Summit Raw Rear Step Towbar

  • Maximum rear end panel protection
  • Side Tub protection
  • 60.3mm Steel tube frame
  • Multiple chassis mounting points
  • Anodised alloy top tread plate
  • Four jacking points
  • Replaceable zinc coated stone guards
  • Compatible with OE factory sensors
  • Integrated Tow Hitch with 50mm ball
  • Towing Rate matches OE specification
  • Provision for Trailer Camera wiring, Air Compressor outlet, 50amp Anderson Plug, Trailer Plug Wiring

 

 

Summit Rear Step Bar

  • All the features of the Summit Raw
  • Plus Optional 2.5mm Steel Press Form Wings that can be Colour Coded for a more integrated look

 

 

Rear Step Towbar

The traditional Rear Step Towbar range provides maximum protection for both rear and side panels, designed to withstand off-road punishment.

  • High quality Powder-coat finish
  • Complete Kit with high tensile zinc plated nuts, bolts & washers
  • Comprehensive DIY Instructions
  • Experienced Technicians available for fitting
  • 3 Year Unlimited Km Warranty
  • Can be Colour Coded for a more integrated look

Rear Bar Wheel Carrier

The ARB Rear Bar Wheel Carrier offers an alternative to factory rear door mounting – often the cause of hinge wear on heavily used vehicles, offers an alternative to spare wheels located under vehicles – particularly difficult to access when bogged and often affect ground clearance and departure angles.

The Rear Carriers have optional Jerry Can holders, and in most cases will accommodate over size tyres.

Swing-out Wheel Carriers and Jerry Can Holders can be optioned to either side.

Hi-lift Jacking points are standard as are integrated towing systems – on most models.

Accessories include HF Aerial Mount Brackets and Camp Light mountings.

  • Available for a range of popular models
  • High quality Powder-coat finish
  • Complete Kit with high tensile zinc plated nuts, bolts & washers
  • Comprehensive DIY Instructions
  • Experienced Technicians available for fitting
  • 3 Year Unlimited Km Warranty
  • Can be Colour Coded for a more integrated look

Kaymar

Kaymar has a range of Spare Wheel Carriers, Rear Replacement Bars and accessories that are renowned for their proven excellence in finish, in their ease of fit and reliability, for most popular models.

  • Designed & Manufactured in Australia
  • Quality World leading design and precision construction
  • Left and Right Hand SWC and Jerry Can Holders
  • Improved Departure Angles
  • Steel rear end protection
  • Integrated towbars where applicable
  • Gas struts on most models
  • ADR Approved LED lights
  • Accessories include telescopic light poles, Hi-lift jack holders, HF aerial brackets,
  • Fully supported Spare parts
  • High quality Powder-coat finish
  • Complete Kit with high tensile zinc plated nuts, bolts & washers
  • Comprehensive DIY Instructions
  • Experienced Technicians available for fitting
  • 3 Year Unlimited Km Warranty

 

Hayman Reese X-BAR

The Hayman Reese engineered and manufactured X-Bar is a rugged, go-anywhere towbar designed for the active off-roader, as well as the 4WD Tourer. More than just a towbar, the X-Bar has three rated recovery points, increased departure angle for maximum clearance and superior strength to get you out of any situation.

  • The centre recovery point is quick and simple to use, suitable for single recovery straps and rated to 8000 kg.
  • Side forged recovery points rated to 4000 kg each. Easy to see and access for quick attachment in any situation.
  • X-Bar has up to 100mm extra rear clearance, which results in 5degree increased departure angles, increasing vehicle capability.
  • X-Bar’s increased thickness side plate are made to suit the vehicle. Designed to enable maximum clearance and superior strength.
  • Integrated twin plug points allow for a smooth look and maximum protection from impact.
  • The extended drop forged ball mount provides the correct height for standard trailer and caravan connection. The positioning allows for an ADR compliant height even when the vehicle is lifted by 50mm.
  • On the reverse side, the X-Bar has a removable integrated bash plate for increased protection of plug mounting points and wiring.
  • Comprehensive DIY Instructions
  • Experienced Technicians available for fitting
  • 3 Year Unlimited Km Warranty

If you would like any further information or to discuss rear protection and towing options for your 4x4, please make contact with one of our experienced staff.